MicroSwiss Micro Swiss / Coated Nozzle M6 / 1.75mm M01900420.40

  1. Accessories
  2. Nozzle
Micro Swiss / Coated Nozzle M6 / 1.75mm
MicroSwiss

Micro Swiss / Coated Nozzle M6 / 1.75mm

CHF 14.45 incl. VAT

Country of origin:

0.20mm CHF 14.45 Available immediately
0.25mm CHF 14.45 Available immediately
0.30mm CHF 14.45 Available immediately
0.40mm CHF 14.45 Available immediately
0.50mm CHF 14.45 Available immediately
0.60mm CHF 14.45 Available immediately
0.80mm CHF 14.45 Available immediately

Quantity (pcs):

Coated brass nozzle is ideal for non-abrasive standard filaments, and has a lower coefficient of friction resulting in a more consistent flow than the standard brass nozzle.


If you want to make small parts with lots of details, use a small nozzle diameter. In the opposite case, if you want to finish faster, you can use a larger nozzle. The standard nozzle for new printers is usually 0.40mm.

Mechanical properties:

  • Thread: M6
  • Total length: 13mm
  • Thread length: 7.5mm
  • Wrench size: 7mm
Item no. M01900420.40
Barcode M01900420.40
Manufacturer MicroSwiss
Diameter 1.75mm
Nozzle diameter 0.30mm, 0.80mm, 0.60mm, 0.40mm, 0.25mm, 0.50mm, 0.20mm
Material nozzles Coated
Country of origin America

Customers who bought this product, also bought:

Micro Swiss / CM2 M6 Nozzle / 1.75mm MicroSwiss
Micro Swiss / CM2 M6 Nozzle / 1.75mm
0.40mm CHF 25.45
0.60mm CHF 25.45
0.80mm CHF 25.45
1.00mm CHF 25.45
15%
Filament PET-G Black 1.75mm Roffelsen
Filament PET-G Black 1.75mm
1000g CHF 18.66
2500g CHF 43.31
E3D v6 Nozzle Brass - 1.75mm E3D
E3D v6 Nozzle Brass - 1.75mm
0.15mm CHF 18.95
0.25mm CHF 14.70
0.30mm CHF 9.95
0.35mm CHF 8.45
0.40mm CHF 8.45
0.50mm CHF 8.45
0.60mm CHF 8.45
0.80mm CHF 8.45
E3D V6 Heater Block for Sensor Cartridges & Fixings E3D
E3D V6 Heater Block for Sensor Cartridges & Fixings
CHF 16.20
Software: Rent-a-Shop.ch