Properties of PETG from the plastic family PET
Polyethylene Terephthalate Glycol (PETG) is one of the world’s most common thermoplastic polymers. Extrudr PETG was developed for a wide range of applications
where the main requirement is a good balance between mechanical and optical material properties. The raw material is approved according to the FDA-, REACH- and RoHS-Standards. PETG is flame retardant according to UL 94 at a wall thickness of 3.2 mm.
Features PET-G:
- Good mechanical properties
- High chemical resistance
- Low warping tendency
- Low shrinking
- Recycleable
Printability
Printing temperature mm/s | 210 - 230°C |
---|
Printing speed | 40 - 60 mm/s |
---|
Temperature Printbed | 60 - 70°C |
---|
Level of difficulty | easy |
---|
Surface | Normal |
---|
Specific weight | 1.29g/cm3 |
---|
Heat resistance temperature | 75°C |
---|
Possible nozzles | brass, Coated, copper, hardened Steel, ruby, stainless steel |
---|
Adhesion types | 3DLac Adhesion spray, PrintaFix, Spring steel plate PEI |
---|
Special properties | Chemical Resistance |
---|
Variants
Article | Filament | Packaging | Spool diameter | inner diameter | Spool width | Price | |
---|
01149205.11 | 1.1kg | Plastic Spool | 20 cm | 5.2 cm | 6.8 cm | CHF 42.45 | |