eSUN

Filament PLA light weight Natural 1.75mm

CHF 37.45 incl. VAT

Country of origin:

1000g CHF 37.45 Available immediately

Quantity (pcs):

Properties of PLA light weigh from the plastic family PLA

A material specially developed for aero modelling. The interlayer bonding is stable, and the foaming rate and strength can be controlled by adjusting the printing temperature. Using active foaming technology to achieve lightweight, low-density PLA parts, the foaming volume ratio is 220%, and the density is as low as 0.54g/cm3. Foaming makes the layered pattern almost invisible, and the surface of the printed item is matte and delicate. Under the same model and at the same speed, the lightweight PLA enables the model aircraft to have a lighter wing load and a lower stall speed, which can greatly
improve the performance of the model aircraft.

Printability

Printing temperature mm/s190 - 270°C
Printing speed40 - 100 mm/s
Temperature Printbed45 - 55°C
Level of difficultymedium
SurfaceMatt
Specific weight1.2g/cm3
Heat resistance temperature53°C
Possible nozzlesbrass, Coated, copper, hardened Steel, ruby, stainless steel
Adhesion types3DLac Adhesion spray, PrintaFix, Spring steel plate PEI
Further

Since the ePLA-LW foams continuously in the melting cavity of the high-temperature nozzle, the retraction basically does not work.
Stringing is normal during printing. It is recommended to print the rc plane in vase mode to reduce the effect of stringing.

Foaming ratio is related to temperature, printing speed, nozzle melting cavity size, pay attention to compare model design
wall thickness according to your own printing situation, adjust extrusion rate, temperature, speed and other parameters.

Variants

ArticleFilamentPackagingSpool diameterinner diameterSpool widthPrice
01122016.1-41kgPlastic Spool20 cm5.3 cm6.85 cmCHF 37.45
Item no. M01122016.1-4
Barcode M01122016.1-4
Manufacturer eSUN
Diameter 1.75mm
Plastic type PLA light weigh
Color Transparent, White
Level of difficulty medium
Surface Matt
Country of origin China
Filament Packaging Plastic Spool
Plastic family PLA

Zubehör

Customers who bought this product, also bought:

Micro Swiss / Coated Nozzle for Creality K1 / 1.75mm MicroSwiss
Micro Swiss / Coated Nozzle for Creality K1 / 1.75mm
0.40mm CHF 17.20
0.60mm CHF 17.20
0.80mm CHF 17.20
Filament PLA Black 1.75mm Roffelsen
Filament PLA Black 1.75mm
1000g CHF 21.95
2500g CHF 50.95
Filament PET-G Black 1.75mm Roffelsen
Filament PET-G Black 1.75mm
1000g CHF 18.66
2500g CHF 43.31
Software: Rent-a-Shop.ch